Bell Cowl Male

Where would you use a Bell Cowl single skin(0.5mm thickness)?
Compact, proven design and is named after its shape.
The most common cowl used with over 10,000 sold within the Cape Town area.
Excellent rain and wind protection (has a conical cap cover inside).
Used for capping the flue on a roof in an area where there is average wind strength.
Cowls cap and close the exposed flue opening on the roof ensuring that rain and birds don’t enter the flue duct.
They are used along with our plain ducts, and can be used with most fireplaces and stoves.

A good flue kit consists of both insulated and plain flue ducts, which is the industry standard. The flue piece which connects the plain flue duct with the insulated flue duct is called an insulated “end-cap”, and this item of the flue kit is installed about 300mm below ceiling level and runs into the roof space. Single skin ducts get really hot and serve as an extension of the fireplace by helping to heat your interior. Whereas an insulated duct is composed of two plain flue ducts within each other, with an insulation material between them and has a large diameter than a plain duct. An insulated duct only gets warm and this is much safer. In this way your waterproofing will be more durable as well, as the outside of the insulated flue duct will not expand and contract upon heating and cooling down like a single skin flue duct does. Lastly, an insulated duct will vastly decrease the build-up of condensation within your flue, as the insulation prevents the hot smoke from cooling down too quickly. It is therefore preferable and safer to use insulated flues once the flue duct leaves the interior of the room that is being heated.

All our flue kits include the European CE certified Atritube flue system which is imported from Greece. All Atritube flues are made from superior 0.4mm thickness, 304 grade Stainless Steel, which is suitable to withstand long term corrosion from the harsh chemicals within the flue gases of closed combustion fireplaces. These flues are seam welded and utilise a clamp method of assembly which makes drilling and pop riveting obsolete.

All stainless steel flues discolour overtime, due to a natural chemical reaction caused by exposure to 02 in the air and the heat from your fireplace. This creates ‘living art’ in your home, as the colours range from golden to amber, even purples and blues, depending on how hot your fireplace is fired. If you’d prefer something other than a ‘stainless steel look’, then you can choose to have your flues sprayed in the same colour as your fireplace i.e. black, anthracite grey, Ivory. This is done at an additional charge and needs to be pre-ordered with your fireplace.